-86℃/-123℉;-60℃/-76℉;-45℃/-49℉;4℃/39℉
Availability: | |
---|---|
JUXIN’s 25L Portable ULT Freezer (DW-4525) gives you dependable, on-the-move cold chain control with the exact specs buyers care about: an every-point settable range of +18°C to −45°C, pull-down from 25°C to −45°C in ~1.5 hours at 25°C ambient, and noise <50 dB for patient-adjacent or vehicle use.
These parameters translate into faster readiness for last-mile vaccine runs, field sampling, and on-site QC—while keeping teams productive in clinics, labs, and mobile units. Pair the quiet profile with true AC/DC flexibility and you can stage, transport, and hand off micro-lots without re-packing or risking excursions, cutting process time and protecting yield across your cold-chain workflow.
Item | DW-4525 |
---|---|
Capacity | 25 L |
Temperature Range | +18°C to −45°C |
Pull-down | 1.5 h (25°C → −45°C, 25°C ambient, empty) |
Control / Stability | Target temperature ±1°C |
Power | 100–240 V AC, 50/60 Hz; 12/24 V DC; Max 100 W; ≈30 W steady-state |
Noise | <50 dB |
Cooling / Refrigerant | Free-piston Stirling + gravity thermosiphon; Helium (He) |
Safety | ±10°C warm/cold alarms; lockable lid |
Size & Weight | Exterior 616 × 392 × 455 mm; net weight 17.5 kg |
Certifications | CE/EMC, CE/LVD, CQC |
Wide operating temperature with every point setting
Precise temperature control, Inner temperature fluctuation within ±1℃
At the 25℃ ambient temperature. Very High Efficiency
Very flexibility, You can bring it to anywhere you want
Low Vibration and Noise
Use 99.999% Helium refrigerant and R-170 Cooling Conduction liquid
Cooling Chart
Warming Chart
Type | DW-4525 | DW-6025 | DW-8625 | DW-0225 | ||
Storage Volume | 25L | |||||
Electric Power | 100V AC to 240V AC;50Hz,60Hz;12V DC to 24V DC | |||||
Maximum Power (Current) | 100W (0.5A@220V,4.6A@24V) | |||||
Cooling Engine | Free-piston Stirling Cooler | |||||
Refrigerant | Helium (He) | |||||
Heat Transport System | Gravity Driven Thermosiphon | |||||
Temperature Range | 18℃ to -45℃ | 18℃ to -60℃ | 18℃ to -86℃ | 2℃ to 8℃ | ||
Environmental Conditions | Non-corrosive, Non-flammable, Non-explosive, Altitude up to 2000m (Temperature 5℃ to 35℃, maximum relative humidity 80%) | |||||
Performance Data | Ambient temperature is 25℃;Empty Cabinet | |||||
Take 1.5 hours from 25℃ to -45℃ | Take 2.5 hours from 25℃ to -60℃ | Take 3.5 hours from 25℃ to -80℃ | Take 0.5 hours from 25℃ to 2℃ | |||
Temperature Control Capability | Target Temperature ±1℃ | Target Temperature ±1℃ | Target Temperature ±2℃ | Target Temperature ±1℃ | ||
Steady State Energy | Ambient temperature is 25℃ | |||||
30W | 40W | 75W | 15W | |||
Insulation | High performance polyurethane foam | |||||
Noise | <50dB | <55dB | <55dB | <50dB | ||
Control Sensor | One RTD(PT100 Class B),precision±0.3 | |||||
Security | Lockable lid | |||||
Warm and cold alarms | Setpoint ±10℃ | |||||
Defrost Method | Manual | |||||
Certification | CE/EMC、CE/LVD、CQC | |||||
Interior(LxWxD) | 300*250*300mm | |||||
Exterior(LxWxD) | 616*392*455mm | |||||
Net Weight, Empty | 17.5KG | |||||
Shipping(LxWxD) | 710*480*530mm | |||||
Shipping Weight | 21KG |
The DW-4525 brings −45 °C setpoints with ±1 °C control into a compact 25 L platform, pulling down from 25 °C to −45 °C in ~1.5 h so teams can pre-condition samples, sensors, and fixtures on schedule. Dual-power (100–240 V AC / 12/24 V DC) and <50 dB acoustics enable quiet, bench-to-vehicle operation without re-packing. Result: reproducible experiments and faster turnaround for low-temperature physics and superconductivity workflows.
With a +18 °C to −45 °C digital range, ±10 °C warm/cold alarms, and a lockable lid, DW-4525 stabilizes vaccines, biologics, and clinical trial specimens near point-of-care while maintaining chain-of-custody. Its 25 L capacity and 616×392×455 mm footprint fit carts and clinics, and AC/DC flexibility keeps runs continuous from hospital mains to mobile units. Benefit: fewer excursions, stronger compliance, and higher sample integrity in last-mile delivery.
A Stirling-based portable freezer delivering −45 °C, ±1 °C stability and ~1.5 h pull-down supports ground integration & test, pre-cooling payload components, adhesives, and calibration targets before environmental chambers. AC/DC mobility and low noise simplify movement between cleanrooms, labs, and transport. Outcome: higher schedule reliability and reduced temperature-related rework prior to flight.
For electronics cooling, polymer/adhesive conditioning, and specialty materials, DW-4525 offers consistent −45 °C staging in 25 L with ≈30 W steady energy use (100 W max), minimizing floor-space and utility impact. Fast ~1.5 h pull-down shortens cycle times, while portable AC/DC operation turns any cart into a low-temp station. The payoff is improved yield, tighter QC, and fewer scrap-driven delays.